Product
  1. HOME
  2. Product

 

BONTEPONE

 

BONTAMIDE

 

BONTAMINE

 

Advanced Epoxy and Non-Epoxy
BONTAMINE
Product

Amine Value

Viscosity
(CPS/25℃)

Color
(MAX)

 Active
(AHEW)

Mixing ratio
(PHR)
EEW=190

Pot Life(min)
(25℃/100g)

 Applications Property
Adhesive Lamination Casting Paint Civil Engineering
5010 120±30 10000-14000 4 190 100 (10g)3-5

O

   

 

  Fast curing, able to cure in low temperature.
5010-7 120±30 10000~14000 4 190 100 (10g) 4-5 O         Fast curing, able to cure in low temperature.
5015 120±20 7000-10000 4 190 100 (10g) 3-5 O         Fast curing, able to cure in low temperature.
5020 240±30 10000-13000 4 190 100 (50g)15 O     O O Transparent, fast curing and no amine blush.
5020F-1 300±30 6000-8000 4 105 100 14 O     O O Fast curing, able painting after two hours.
5110 290±30 500-900 3 100 50 42   O   O O Weather and water resistance.
5111 260±30 300-700 2 110 50 50   O   O O Similar to 5110
5113-2 370±30 150-250 2 60 33 22   O   O O Low viscosity and low Color, chemical resistance.
5113-4 310±30 100-150 1 100 50 20   O   O O Low viscosity and low Color, chemical resistance.
5113-6 340±30 100~200 2 90 50 12   O   O O Excellent surface gloss，Low temperature, wet surface curing.
5118 240±30 100-150 2 100 50 180   O   O O Low viscosity and low Color, chemical resistance.
5119
series		 -- 4000-6000 -- -- 50 30         O Wet ground and can operate in the water.
5168 260±30 300~500 3 115 60 45   O O O   Low viscosity and low Color, chemical resistance.
5120 270±30 400-600 2 90 50 23   O   O O Low viscosity, glossy.
5130 330±30 200-400 2 90 50 38   O   O O Low viscosity, glossy.
5140 320±30 200-400 2 90 50 30   O   O O Low viscosity, glossy.
5150 310±30 200-400 3 100 50 28 O   O O   Low viscosity, excellent surface gloss, good physical properties.
5210 760±30 200-400 4 45 25 35   O     O Fast curing, solvent type.
5220 820±30 200-400 8 60 33 26   O     O Bonding of crack, primer for wet surface.
5220-1 - 300~600 8 - 33 15 O   O   O Suitable for use in low temperature environment
5230
series		 540±30 100-300 6 57 33 8 O     O O Wet surface curing, fast curing.
5240 550±30 300-500 6 80 50 24   O

O

  O Fast curing and chemical resistance.
5250 420±30 800-1300 8 90 50 14       O O Wet surface tolerance, fast curing.
5270 650±30 1000-2000 8 85 50 16 O     O O Fast curing in low temperature.
5280 490±50 250-450 4 95 50 30 O   O   O High compression, flexural and tensile strength.
5310 -- 1500-2500 12 90 50 32 O   O O O Acid resistance, fast curing and high viscosity.
5320 250±30 500-800 12 90 50 38 O   O O O Similar to 5310, low viscosity.
5320-51 250±30 400~600 12 90 50 30 O   O O O Similar to 5320
5330
series		 220±30 1000~2500 12 110 50 130 O   O O O Acid resistance, long pot life.
5340 270±30 200-400 12 110 50 70 O   O O O Similar to 5310, good insulation.
5370-2
series		 210±30 900-1500 12 -- -- -- O   O O O Operation easily, Reshape molding.
5410 600±30 60-150 8 44 25 120     O     Heat resistance.
5420 550±30 700-1500 4 60 30 32 O     O   Heat resistance.
5430 160±30 (40℃)
10000-20000		 12 30 20 24 hr O   O     Fast curing, heat resistance.
5510 -- 70~100 2 160 85 180     O     Good electrical properties, heat resistance.
5512 800±30 10-20 2 35 20 60 O   O O   Room temperature curing, low viscosity, low toxicity, high HDT
5520 - 60-80 2 160 85 180   O O     Heated Cure, carbon fiber lamination.
5620 450±30 10-30 2 60 30 6 hr   O O     Low viscosity, for accessory casting.
5630 250±30 20-50 2 100 50 8 hr   O O     Low viscosity, long pot life.
5640 360±30 30-50 2 75 33 74   O O     Low viscosity, for accessory casting.
5643 350±30 60-120 2 80 50 12 hr   O O O   Low viscosity, long pot life.
H-55 650±30 3500~4500 8 -- 50 31-35 O   O O   Resistance of water, wet and scratching.
H-885-3 330±30 50~70 8 -- -- -- O   O O   Resistance of water, wet and scratching.

(請向左右滑動)